|
|
|
To install sound deadeners, you should first have the sound deadening material available along with a knife or a scalpel, some glue, a hair dryer, a roller, acetone, and rags. As per the material, make sure that you get it out in the sun first to get it warm. You see, this sound deadening material is easier to work with and is more pliable once warm. Take out your cars seats, dashboard, door panels, and carpet. Also make sure that you strip the carpet from the trunk. Clean the surface of your car including the floor, the firewall, the doors, and the trunk. You can use the acetone to do this part. And when you have done so, spray on the glue to the metal surface. Then, peel off the backing from the deadening material and apply it to the metal surface. Make sure that the material adheres and sticks to the surface. Check with the use of a roller. To keep the material pliable as you apply it, use a hair dryer to continually heat it up. It is also important that you keep out any bubbles or bumps so that you can assure yourself that the material has adhered completely. If there are some areas where there are ridges, make sure that the material actually fills the gaps. The wrong thing to assume would be that it is okay to put in the material and just bridge any gaps. |
加入最爱